DC-AC Inverter 12V to 220V 110V Single Silicon Machine Pre-stage Booster Step Up Module 150W
Description:
Power: 50-150W
Input: DC12V
Output: 220V
Static current: about 0.05A
Output waveform: high frequency square wave
Output frequency: about 20KHz
Protection: no protection
The PCB board is made of military-grade board, and the size is 3*10 cm. It is mainly used for: electronic DIY. Inverter preamp.
Note:
1. This board is a high-frequency square wave AC output, so it can't be used by general inductive appliances, such as electric motor, electric fan, coil transformer, etc.
2. When connecting to a small load (LED light, mobile phone charger, DVD set-top box, etc.), it is recommended to connect the output voltage to a low point such as: 172V or 200V.
3. It is recommended to increase the heat sink when the load is working for a long time (≥100W).
4. The power supply can't be reversed. The other power supply and power line should have enough current.
5. Do not overload the output and do not short circuit.
6. Output high frequency no-load voltage universal meter measurement will show high (is not correct, not actual voltage)
The default output wiring is as follows: "For reference only"
V0--V2=110V V0--V3=175V
V0--V4=200V V0--V5=220V
V5--V4=20V V5--V3=45V
V5--V2=110V V4--V3=28V
V4--V2=90V V3--V2=62V
Package includes:
1 x Power module
Package includes:
1 x Power module
DC-AC Inverter 12V to 220V 110V Single Silicon Machine Pre-stage Booster Step Up Module 150W See detail
