100W 12V Monocrystalline Solar Panel + Solar Controller + One Pair 3m Extension Cable + 2*Alligator Clip + 4*Mounting Bracket Kit
Features:
1.High battery efficiency, high quality silicon material, long-term output stability and reliability.
2.Strict quality control ensures stability and reliability, complete quality control with 23 test procedures
3.High light transmittance low iron tempered glass for enhanced stiffness and impact resistance
4.MC4 lead, easy to plug and play.
About Solar Controller:
1.Built-in industrial microcontroller.
2.Full 4-level PWM charge management.
3.One-button setting, digital display, automatic memory function.
4.Dual mosfet reverse current protection, low heat generation.
5.Built-in short circuit protection, open circuit protection, reverse protection, overload protection.
| Solar Panel Kit Specifications | |
| Size | about 540*1050mm/21.26*41.39" |
| Power | 100W |
| Tolerance | +/- 5% |
| SLA battery voltage | 12V |
| Material | Monocrystalline silicon |
| Open circuit voltage | 21V |
| Short circuit current | 6A |
| Working voltage | 18V |
| Working current | 5.5A |
| Temperature coefficient of Isc | ( 010 +/- 0.01)% / C. |
| Temperature coefficient Voc | - (0.38 +/- 0.01)% / C |
| Temperature coefficient power Voc | -0.47% / C |
| Temperature | -40°C to + 80°C |
| DC Male Cable Type | 5521 |
| DC Male Cable Length | 30cm |
| Solar Controller | |
| Model | PWM |
| Current | 10A |
| Buck charging | 28.8V |
| Floating charge | 27.4V |
| USB output | 5V / 3A |
| Consuming | <10mA |
| Discharge stop | 21.4V |
| Voltage | DC 12V / 24V |
| Maximum solar input | <50V |
| Rated working current | ≤20A |
| Discharge reconnect | 25.2V |
| Working temperature | -35 °C ~ 60 °C |
| Output voltage | 12V / 24V automatically distinguishes voltage |
| 12 AWG Solar Cable Specification | |
| Stranded wire | 7 |
| Length | 3 Meter |
| Color | red / black |
| Wire thickness | 12 AWG |
| Flow 90oC wet / dry | 30A |
| Insulation thickness | 0.045 inches |
| Approximate net weight | 30 lbs / 1M' |
| Nominal outer diameter | 0.188 inches |
| Conductor | Stranded bare copper fully annealed according to ASTM B3. Class B stranded wire |
| AlligatorClip Cable | |
| Quantity | 1 pair |
| Total length | 3 meters |
| Color | Red + Black |
| Working current | 3A |
| Material | Metal + Rubber |
| Length | 7.3cm |
| Bracket for Solar Panel | |
| Size | 7.8 * 4.5 * 4cm |
| Corner | 180° |
Safety instructions:
1.Make sure the battery voltage is sufficient for the controller to identify the battery type before first installation.
2.The battery cable should be as short as possible to minimize losses.
3.The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL (not applicable to nickel-metal hydride, lithium ion or other batteries).
4.The charge regulator is only suitable for adjusting solar modules. Never connect another charging power source to the charging regulator.
Package Included:
1 x 100W Solar Panel
2 x 3 Meter Solar Panel Extension Cable (Red + Black)
1 x 10A Solar Controller
2 x AlligatorClip (Red + Black)
4 x Solar Mounting Bracket
1 x 30cm DC Male Cable
100W 12V Monocrystalline Solar Panel + Solar Controller + One Pair 3m Extension Cable + 2*Alligator Clip + 4*Mounting Bracket Kit See detail
